1，初始版本v1.0

.doc/测试命令.txt

+1,数据推送：
+	AA 55 09 80 01 06 01 10 01 0A 8C 01 FF 6D
+2,控制继电器2开：
+	AA 55 08 80 01 05 01 10 02 02 01 9E 0A
+	AA 55 08 80 01 05 01 10 02 02 00 8E 2B
+2,控制显示屏开：
+	AA 55 07 80 01 05 01 10 03 01 4C 65
+	AA 55 07 80 01 05 01 10 03 00 5C 44
+
+
+1，组网：
+	AA 55 07 80 01 04 00 10 00 01 C5 D3
+     离网：
+	AA 55 07 80 01 04 00 10 00 00 D5 F2
+2，查询网络：
+	AA 55 07 80 01 04 00 10 01 00 E6 C3
+	
+空调串口测试：
+3，开关：
+	开：AA 55 07 00 01 04 01 10 10 01 1B ED    
+	关：AA 55 07 00 01 04 01 10 10 00 0B CC
+4，运行模式：
+	制热：AA 55 07 00 01 04 01 10 11 04 4B 48
+	制冷：AA 55 07 00 01 04 01 10 11 05 E5 B0
+5，设定温度：
+	设置22.5度：AA 55 08 00 01 05 01 10 12 00 E1 50 FB
+	设置33.0度：AA 55 08 00 01 05 01 10 12 01 5E 53 A9
+6，设定风速：
+	中：AA 55 07 00 01 04 01 10 13 02 1B ED    
+	关：AA 55 07 00 01 04 01 10 13 00 0B CC
+7，上报故障：
+	zigbee故障：AA 55 07 00 01 04 01 10 14 02 1B ED    
+8，设置童锁：
+	打开：AA 55 07 00 01 04 01 10 15 01 1B ED  	
+	关闭：AA 55 07 00 01 04 01 10 15 00 1B ED 
+9，设置延时关机：
+	延时关机设置1小时：
+		  AA 55 07 00 01 04 01 10 16 0A 1B ED  	
+10，设置摆风模式：
+	向下：AA 55 07 00 01 04 01 10 17 00 1B ED  	
+11，设置屏保时间：
+	60s：AA 55 07 00 01 04 01 10 18 01 1B ED   30*（1+1）    默认0，对应30s
+12，设置滤网清洗时间：
+	2000h：AA 55 08 00 01 05 01 10 19 07 D0 1B ED 
+		   
+13，同步当前环境温度：								//待测试
+	：AA 55 08 00 01 05 01 10 1A 07 D0 1B ED 
+14，设置温度校准：
+	-9.0度：AA 55 07 00 01 04 01 10 1B A6 1B ED 
+	
+15，设置勿扰模式：
+	打开勿扰：AA 55 07 00 01 04 01 10 1C 01 1B ED 
+	
+	
+	
+产测命令调试：
+1，读取mcu版本
+	AA 55 00 08 10 00 01 04 00 ED 00 00 22 4C □
+    AA 55 00 0C 10 00 01 08 00 ED 00 00 10 00 10 10 E0 E2 
+2，读取mac
+	AA 55 00 08 10 00 01 04 00 ED 01 00 11 7D □
+    AA 55 00 09 10 00 01 05 00 ED 04 00 01 44 D9
+2，推出产测
+	AA 55 00 08 10 00 01 04 00 ED 04 01 FE A9 □
+    AA 55 00 09 10 00 01 05 00 ED 04 00 01 44 D9
+3，读取按键消息
+	AA 55 00 08 10 00 01 04 00 ED 06 00 88 EA 
+	AA 55 00 0E 10 00 01 0A 00 ED 06 00 00 00 00 00 00 00 F5 48
+4，屏幕熄灭测试
+	AA 55 00 08 10 00 01 04 00 ED 07 00 BB DB 
+	AA 55 00 09 10 00 01 05 00 ED 07 00 00 11 8A
+5，温度查询
+	AA 55 00 08 10 00 01 04 00 ED 09 00 98 D4 □
+	AA 55 00 0A 10 00 01 06 00 ED 09 00 01 2E 4D D0
+6，触发上报：
+	AA 55 00 08 20 00 00 04 00 ED 08 00 B2 2F 
+	

Code/KKAllToOneFloorHeatingMG21SDK665/00ikonke-app/OptTunnel.xml

+<?xml version="1.0"?>
+<configurator>
+  <domain name="General" spec="zcl-7.0-07-5123-07" certifiable="true">
+    <older spec="zcl6-errata-14-0129-15" />
+    <older spec="zcl-6.0-15-02017-001" />
+    <older spec="zcl-1.0-07-5123-03" />
+  </domain>
+  <domain name="Lighting &amp; Occupancy" spec="l&amp;o-1.0-15-0014-04" certifiable="false" />
+  <domain name="HA" spec="ha-1.2.1-05-3520-30" dependsOn="zcl-1.0-07-5123-03" certifiable="false">
+    <older spec="ha-1.2-05-3520-29" dependsOn="zcl-1.0-07-5123-03" certifiable="true"/>
+    <older spec="ha-1.1-05-3520-27" dependsOn="zcl-1.0-07-5123-03" certifiable="true"/>
+  </domain>
+  <cluster>
+    <name>OptTunnel</name>
+    <domain>General</domain>
+    <description>The private cluster of the Konke company is used for the extended use of the private protocol </description>
+    <code>0xFCC0</code>
+    <define>OPT_TUNNEL_CLUSTER</define>
+    <client tick="false" init="true">true</client>
+    <server tick="false" init="true">true</server>
+    <attribute side="server" code="0x0000" define="OPT_DATA" type="CHAR_STRING" length="254" writable="true" default="" optional="true" >OptData</attribute>
+    <attribute side="server" code="0x0001" define="TTS" type="CHAR_STRING" length="254" writable="true" default="" optional="true" >TTS</attribute>
+    <attribute side="server" code="0x0002" define="MTO_RR_RspRandom" type="INT16U" min="0x00" max="0xFFFF" writable="true" default="" optional="true" >MTO_RR_RspRandom</attribute>
+    <attribute side="server" code="0x0003" define="AssociatedAnnounce" type="CHAR_STRING" length="16" writable="true" default="" optional="true" >AssociatedAnnounce</attribute>
+    <attribute side="server" code="0x0010" define="CMEI" type="CHAR_STRING" length="32" writable="true" default="" optional="true" >CMEI</attribute>
+    <attribute side="server" code="0x0011" define="ISN" type="CHAR_STRING" length="32" writable="true" default="" optional="true" >ISN</attribute>
+    <attribute side="server" code="0x0012" define="InstallCode" type="CHAR_STRING" length="32" writable="false" default="" optional="true" >InstallCode</attribute>
+    <attribute side="server" code="0x0013" define="CHUNK_N1" type="CHAR_STRING" length="32" writable="true" default="" optional="true" >CHUNK_N1</attribute>
+    <attribute side="server" code="0x1000" define="ErrorCode" type="INT8U" min="0x00" max="0xFF" writable="false" default="0x00" optional="true" >ErrorCode</attribute>
+    <attribute side="server" code="0x1001" define="ChildLock" type="BOOLEAN" min="0x00" max="0x01" writable="true" default="0x00" optional="true" >ChildLock</attribute>
+    <attribute side="server" code="0x1002" define="DelayOff" type="INT8U" min="0x00" max="0xF0" writable="true" default="0x00" optional="true" >DelayOff</attribute>
+    <attribute side="server" code="0x1003" define="SwingMode" type="ENUM8" min="0x00" max="0xFF" writable="true" default="0x00" optional="true" >SwingMode</attribute>
+    <attribute side="server" code="0x1004" define="ScreenSaverTime" type="ENUM8" min="0x00" max="0xFF" writable="true" default="0x00" optional="true" >ScreenSaverTime</attribute>
+    <attribute side="server" code="0x1005" define="FilterCleanTime" type="INT16U" min="0x0000" max="0xFFFF" writable="true" default="0x0FA0" optional="true" >FilterCleanTime</attribute>
+    <attribute side="server" code="0x1006" define="SystemMode" type="ENUM8" min="0x00" max="0x09" writable="true" default="0x00" optional="true" >SystemMode</attribute>
+    <attribute side="server" code="0x1007" define="TargetTemperature" type="INT16S" min="0x0000" max="0xFFFF" writable="true" default="0x0000" optional="true" >TargetTemperature</attribute>
+    <attribute side="server" code="0x1008" define="CurrentTemperature" type="INT16S" min="0x0000" max="0xFFFF" writable="true" default="0x0000" optional="true" >CurrentTemperature</attribute>
+    <attribute side="server" code="0x1009" define="CalibrationTemperature" type="INT8S" min="0x00" max="0xFF" writable="true" default="0x00" optional="true" >CalibrationTemperature</attribute>
+    <attribute side="server" code="0x100a" define="FanMode" type="ENUM8" min="0x00" max="0x09" writable="true" default="0x00" optional="true" >FanMode</attribute>
+    <attribute side="server" code="0x100b" define="OnOff" type="BOOLEAN" min="0x00" max="0x01" writable="true" default="0x00" optional="true" >OnOff</attribute>
+    <attribute side="server" code="0x100c" define="NoDisturbMode" type="BOOLEAN" min="0x00" max="0x01" writable="true" default="0x00" optional="true" >NoDisturbMode</attribute>
+  </cluster>
+  
+</configurator>

Code/KKAllToOneFloorHeatingMG21SDK665/00ikonke-app/common_process.h

+#ifndef ______00IKONKE_COMMON_PROCESS_H_____
+#define ______00IKONKE_COMMON_PROCESS_H_____
+
+#include "app/framework/include/af.h"
+#include "././00ikonke-app/general/ikk-debug.h"
+#include "./general/ikk-module-def.h"
+#define 	BUILD_UINT16(lowByte, highByte) \
+          	  ((uint16_t)(((lowByte) & 0x00FF) + (((highByte) & 0x00FF) << 8)))
+
+#define 	HIGH_UINT16(a) (((a) >> 8) & 0xFF)
+#define 	LOW_UINT16(a) ((a) & 0xFF)
+
+#define 	FCC0_ATTR_Error_Code							0X1000
+#define 	FCC0_ATTR_Child_Lock							0X1001
+#define 	FCC0_ATTR_Delay_Off								0X1002
+#define 	FCC0_ATTR_Swing_Mode							0X1003
+#define 	FCC0_ATTR_Screen_Saver_Time						0X1004
+#define 	FCC0_ATTR_Filter_Clean_Time						0X1005
+#define 	FCC0_ATTR_System_Mode							0X1006
+#define 	FCC0_ATTR_Target_Temperature					0X1007
+#define 	FCC0_ATTR_Current_Temperature					0X1008
+#define 	FCC0_ATTR_Calibration_Temperature				0X1009
+#define 	FCC0_ATTR_Fan_Mode								0X100A
+#define 	FCC0_ATTR_ON_OFF								0X100B
+#define 	FCC0_ATTR_No_Disturb_Mode						0X100C
+
+
+
+
+#define 	Device_Type_Air_Condition         	1
+#define 	Device_Type_Floor_Heating         	2
+#define 	Device_Type_Fan					  	3
+
+
+EmberStatus Write_Attr(bool Report,uint8_t ep,uint16_t cluster,uint16_t attr, uint8_t* dataPtr,EmberAfAttributeType datatype);
+
+#define Write_OnOff_Attr(x,ep,data)    			Write_Attr(x,ep,ZCL_ON_OFF_CLUSTER_ID,ZCL_ON_OFF_ATTRIBUTE_ID,data,ZCL_BOOLEAN_ATTRIBUTE_TYPE)
+#define Write_SystemMode_Attr(x,ep,data)    	Write_Attr(x,ep,ZCL_THERMOSTAT_CLUSTER_ID,ZCL_SYSTEM_MODE_ATTRIBUTE_ID,data,ZCL_ENUM8_ATTRIBUTE_TYPE)
+#define Write_TargetTemp_Attr(x,ep,data)    	Write_Attr(x,ep,ZCL_THERMOSTAT_CLUSTER_ID,ZCL_OCCUPIED_HEATING_SETPOINT_ATTRIBUTE_ID,(uint8_t*)data,ZCL_INT16S_ATTRIBUTE_TYPE)
+#define Write_CurrentTemp_Attr(x,ep,data)   	Write_Attr(x,ep,ZCL_THERMOSTAT_CLUSTER_ID,ZCL_LOCAL_TEMPERATURE_ATTRIBUTE_ID,(uint8_t*)data,ZCL_INT16S_ATTRIBUTE_TYPE)
+#define Write_CalibrationTemp_Attr(x,ep,data)   Write_Attr(x,ep,ZCL_THERMOSTAT_CLUSTER_ID,ZCL_LOCAL_TEMPERATURE_CALIBRATION_ATTRIBUTE_ID,data,ZCL_INT8S_ATTRIBUTE_TYPE)
+#define Write_FanSpeed_Attr(x,ep,data)      	Write_Attr(x,ep,ZCL_FAN_CONTROL_CLUSTER_ID,ZCL_FAN_CONTROL_FAN_MODE_ATTRIBUTE_ID,data,ZCL_ENUM8_ATTRIBUTE_TYPE)
+//#define Write_ERROR_CODE_Attr(x,ep,data)   		Write_Attr(x,ep,ZCL_OPT_TUNNEL_CLUSTER_ID,FCC0_ATTR_Error_Code,data,ZCL_INT8U_ATTRIBUTE_TYPE)
+
+#define Write_Child_Lock_Attr(x,ep,data)   		Write_Attr(x,ep,ZCL_OPT_TUNNEL_CLUSTER_ID,FCC0_ATTR_Child_Lock,data,ZCL_BOOLEAN_ATTRIBUTE_TYPE)
+#define Write_Delay_off_Attr(x,ep,data)   		Write_Attr(x,ep,ZCL_OPT_TUNNEL_CLUSTER_ID,FCC0_ATTR_Delay_Off,data,ZCL_INT8U_ATTRIBUTE_TYPE)
+#define Write_Wind_Direct_Attr(x,ep,data)   	Write_Attr(x,ep,ZCL_OPT_TUNNEL_CLUSTER_ID,FCC0_ATTR_Swing_Mode,data,ZCL_ENUM8_ATTRIBUTE_TYPE)
+#define Write_Screen_Save_Time_Attr(x,ep,data)  Write_Attr(x,ep,ZCL_OPT_TUNNEL_CLUSTER_ID,FCC0_ATTR_Screen_Saver_Time,data,ZCL_ENUM8_ATTRIBUTE_TYPE)
+#define Write_Filter_Clean_Time_Attr(x,ep,data) Write_Attr(x,ep,ZCL_OPT_TUNNEL_CLUSTER_ID,FCC0_ATTR_Filter_Clean_Time,data,ZCL_INT16U_ATTRIBUTE_TYPE)
+
+#define Write_MaxTemp_Attr(x,ep,data)    		Write_Attr(x,ep,ZCL_THERMOSTAT_CLUSTER_ID,ZCL_MAX_HEAT_SETPOINT_LIMIT_ATTRIBUTE_ID,(uint8_t*)data,ZCL_INT16S_ATTRIBUTE_TYPE)
+#define Write_MinTemp_Attr(x,ep,data)    		Write_Attr(x,ep,ZCL_THERMOSTAT_CLUSTER_ID,ZCL_MIN_HEAT_SETPOINT_LIMIT_ATTRIBUTE_ID,(uint8_t*)data,ZCL_INT16S_ATTRIBUTE_TYPE)
+
+
+
+typedef struct
+{
+	uint8_t  Device_Type;
+	uint8_t  Device_subType;
+	uint8_t  Binding_Device_SrcEP;
+	uint8_t  mcu_software_version;
+	uint8_t  mcu_hardware_version;
+}DEVICVE_INFO_ST;
+
+extern DEVICVE_INFO_ST g_sDevice_Info;
+uint8_t Read_Zigbee_Version(void);
+kk_err_t PrivateClusterHandler(EmberAfClusterCommand* cmd);
+
+/**********************common interface*******************************/
+uint8_t Get_Device_Endpoint(void);
+uint8_t  Get_Binding_Device_EP(void);
+void print_all_attr_vaule(uint8_t ep);
+#endif /* 00IKONKE_APP_BL55072A_H_ */

Code/KKAllToOneFloorHeatingMG21SDK665/00ikonke-app/driver/ikk-battery.h

+#ifndef __IKONKE_MODULE_BATTERY_H_______________________________
+#define __IKONKE_MODULE_BATTERY_H_______________________________
+
+#include "app/framework/include/af.h"
+
+
+#if defined(ADC_COUNT) && (ADC_COUNT > 0)
+/*	DESP: Battery adc sample init
+ * 	Auth: maozj.20200325.
+ * */
+void kBatteryMonitorInit(void);
+/*	DESP: This function will sample the ADC according to flag whether need to write to attribute
+ * 	Auth: maozj.20200325.
+ * */
+uint16_t  kBatteryMonitorReadVotage(bool bIsWriteAttr);
+#endif
+#endif

Code/KKAllToOneFloorHeatingMG21SDK665/00ikonke-app/driver/ikk-button.h

+#ifndef __IKONKE_MODULE_BUTTON_H_______________________________
+#define __IKONKE_MODULE_BUTTON_H_______________________________
+
+#include "app/framework/include/af.h"
+#include "../general/ikk-module-def.h"
+#include "../general/ikk-debug.h"
+
+
+// Maximum number of buttons supported!
+#define BTN_SUPPORT_MAXN			8
+
+#define BTN_UNKNOW_ID				0	// Valid[1,254], 255 for Operate all at the same time!
+#define BTN_ALLOPT_ID				255	// Valid[1,254], 255 for Operate all at the same time!
+
+
+
+
+typedef enum { EBP_LOW = 0, EBP_HIGH, EBP_BOTH }BtnPolarityEnum;
+
+typedef enum { EBA_IDLE = 0, EBA_CLICK, EBA_DCLICK, EBA_LONGPRESS, EBA_PRESSED, EBA_RELEASED}BtnActionEnum;
+
+typedef void (*pBtnActionCallback)(unsigned char btnIndex, BtnActionEnum action );
+
+typedef struct tag_button_configeration {
+	unsigned char u8ButtonId;
+
+	GPIO_Port_TypeDef port;
+	unsigned int pin;
+
+	BtnPolarityEnum eActionPolarity;
+	bool bSupportDClick;
+	bool bSupportPressedSend; //true:key always long pressed will send pressed message interval 1 second.used to sensor
+	unsigned int u32LongPressDuration;	// MS
+}BtnConfSt;
+
+/*	DESP: Assign an unused interrupt number.
+ * 	Auth: dingmz_frc.20191108.
+ * */
+uint8_t kBtnAssignIRQNO(uint8_t btn_index, unsigned int pin );
+
+/*	DESP:Get usefull assign irq index for other interrupt gpio include button
+ * 	Auth: maozj.20200325.
+ * */
+uint8_t kBtnGetAssignUsefullIndex(void);
+
+/*	DESP: single Button instance register interface.
+ * 	Auth: dingmz_frc.20191108. modify by maozj 20200326
+ * */
+kk_err_t kBtnRegister(uint8_t id, GPIO_Port_TypeDef port, unsigned int pin, BtnPolarityEnum ePolarity, \
+			bool bSupportDClick, bool bSupportPressedSend, uint32_t u32LongPressDuration );
+/*	DESP: button module Initialize configuration interface.
+ * 	Note: Button initialization interface supports one-time registration of multiple buttons!
+ * 	Auth: dingmz_frc.20191107.
+ * */
+kk_err_t kBtnModuleInit(BtnConfSt *btnlist, unsigned char btn_number, pBtnActionCallback pBtnActionCallback );
+
+/*	DESP: get button information by button id
+ * 	Auth: maozj.20191123.
+ * */
+kk_err_t kBtnGetInfoByButtonId(uint8_t id, BtnConfSt *btnConf);
+#endif
+

Code/KKAllToOneFloorHeatingMG21SDK665/00ikonke-app/driver/ikk-led.h

+#ifndef __IKONKE_MODULE_LED_H_______________________________
+#define __IKONKE_MODULE_LED_H_______________________________
+
+
+#include "app/framework/include/af.h"
+#include "../general/ikk-module-def.h"
+
+
+#define LED_OBJS_SUPPORT_MAXN	8
+// the number of physical gpios that can be mapped for a single LED control instance!
+#define LED_GPIO_MAPPING_MAXN	4
+
+#define LED_UNKNOW_ID			0	// Valid[1,254], 255 for Operate all at the same time!
+#define LED_ALLOPT_ID			255	// Valid[1,254], 255 for Operate all at the same time!
+
+#define BLINK_DEAD				0xffffffff
+#define BLINK_NONE				0x0
+
+// LED STATUS
+typedef enum { LED_OFF = 0,	LED_ON = 1,	LED_TOGGLE, LED_IGNORE = 2 }LedOptEnum;
+typedef enum { ELP_LOW = 0/* low to on */, ELP_HIGH/* high to on */ }LedPolarityEnum;
+
+typedef struct {
+	GPIO_Port_TypeDef port;
+	unsigned int pin;
+	unsigned int pwmId; //0 :not use pwm
+}LedGpioListSt;
+
+// led configuration struct
+typedef struct tag_led_config_st {
+	unsigned char u8LedId; 	// 0 ~ 254
+
+	unsigned char u8GpioMappNum;
+	LedGpioListSt gpios[LED_GPIO_MAPPING_MAXN];
+
+	LedPolarityEnum eActionPolarity;
+	//uint8_t pwmIds[LED_GPIO_MAPPING_MAXN]; //band pwm id
+}LedConfSt;
+
+typedef void (*pLedActionDoneCallback)(unsigned char id);
+
+/*	DESP: Indicator lamp behavior control interface.
+	Auth: dingmz_frc.20191108.
+*/
+void kLedOptTrigger(uint8_t id, uint32_t duration_on_ms, uint32_t duration_off_ms, uint32_t times, LedOptEnum start, LedOptEnum end );
+/*	DESP: Toggle LED
+	Auth: maozj.20200226.
+*/
+void kLedOptToggle(uint8_t id);
+
+// Turn ON
+#define LED_OPT_ON(id)	do { \
+	kLedOptTrigger(id, 0, 0, 0, LED_ON, LED_IGNORE); \
+}while(0)
+
+// Turn OFF
+#define LED_OPT_OFF(id)	do { \
+	kLedOptTrigger(id, 0, 0, 0, LED_OFF, LED_IGNORE); \
+}while(0)
+
+// Turn TOGGLE add by maozj 20200226
+#define LED_OPT_TOGGLE(id)	do { \
+		kLedOptToggle(id); \
+}while(0)
+
+/*	DESP: Check if the specified led indicator is bliking.
+ * 	Auth: dingmz_frc.20191108.
+ * */
+bool kLedIsBlinking(uint8_t led_id );
+/*	DESP: single LED instance register interface.
+ * 	Auth: dingmz_frc.20191108.
+ * */
+kk_err_t kLedRegister(uint8_t id, uint8_t gpio_num, LedGpioListSt gpio_list[], LedPolarityEnum ePolarity);
+/*	DESP: led control module Initialize configuration interface.
+ * 	Note: Led initialization interface supports one-time registration of multiple LEDs!
+ * 	Auth: dingmz_frc.20191108.
+ * */
+kk_err_t kLedModuleInit(LedConfSt *ledlist, unsigned char led_number, pLedActionDoneCallback pCallback);
+/*	DESP: led control module Initialize modify by led id.
+ * 	Note: Led initialization interface
+ * 	Auth: maozj.20191226.
+ * */
+kk_err_t kLedModuleInfoModifyGpioById(uint8_t id, LedConfSt ledconf);
+#endif
+

Code/KKAllToOneFloorHeatingMG21SDK665/00ikonke-app/driver/ikk-pwm.h

+#ifndef __IKONKE_MODULE_PWM_H_______________________________
+#define __IKONKE_MODULE_PWM_H_______________________________
+
+
+#include "app/framework/include/af.h"
+#include "../general/ikk-module-def.h"
+#include "em_timer.h"
+
+#define PWM_OBJS_SUPPORT_MAXN			6
+
+#define PWM_UNKNOW_ID					0	// Valid[1,254], 255 for Operate all at the same time!
+#define PWM_ALLOPT_ID					255	// Valid[1,254], 255 for Operate all at the same time!
+
+#define PWM_TIMER_MAX_DUTY_CYCLE_NUM  	40000
+#define PWM_TIMER_MID_DUTY_CYCLE_NUM 	500
+#define PWM_TIMER_MIN_DUTY_CYCLE_NUM 	0
+
+typedef enum {ELP_MIN = 0, ELP_MID,ELP_ANY, ELP_MAX, ELP_TO_BRIGHT/* min to max */, ELP_TO_DARKEN/* max to min */, ELP_OPT_DEFAULT=0xff }PwmGradientDirectionEnum;
+typedef enum {KK_TIMER_CC0=0, KK_TIMER_CC1, KK_TIMER_CC2, KK_TIMER_CC3}PwmTimerChannelEnum;
+typedef enum {KTIMER0=0, KTIMER1, KTIMER2, KTIMER3}TIMER_ENUM;
+
+typedef struct {
+	GPIO_Port_TypeDef port;
+	unsigned int pin;
+	TIMER_ENUM pwmTimer;
+//	TIMER_TypeDef *pwmTimer;
+	PwmTimerChannelEnum pwmChannel;
+	uint32_t timerChannalLocation; //just for EFR32MG13 chip, need check datasheet,search "location"
+}PwmGpioListSt;
+
+// led configuration struct
+typedef struct tag_pwm_config_st {
+	unsigned char u8PwmId; 	// 0 ~ 254
+	PwmGpioListSt gpioInfo;
+	//TIMER_TypeDef timer;
+	//uint8_t pwmChannel;
+}PwmConfSt;
+
+extern TIMER_TypeDef *ktimer[];
+extern CMU_Clock_TypeDef kclock[];
+
+//funtion callback when pwm duty cycle is changed to max or min
+typedef void (*pPwmActionDoneCallback)(unsigned char id, PwmGradientDirectionEnum opt);
+
+/*	DESP: get the pwm index by led_id.
+ * 	Auth: maozj.20200211.
+ * */
+uint8_t kPwmGetIndexByID(uint8_t pwm_id );
+/*	DESP: Check whether all pwm have stopped action detection.
+ * 	Auth: maozj.20200211.
+ * */
+bool kPwmGradientChangeIsGoing(void);
+
+/*	DESP: Check if the specified pwm  is changing.
+ * 	Auth: maozj.20200211.
+ * */
+bool kPwmIsChanging(uint8_t pwm_id );
+/*	DESP: registration the system pwm driver processing function interface.
+	Auth: maozj.20200211.
+*/
+void kPwmDriverhandler(uint8_t pwm_index, PwmGradientDirectionEnum st, uint16_t value);
+
+/*	DESP: pwm frequence init interface.
+ * 	Auth: maozj.20200212.
+ * */
+void kPwmFrequencySetInit(uint16_t frequency_hz, uint16_t init_duty_cycle, PwmGpioListSt gpioInfo);
+
+/*	DESP: pwm control module Initialize configuration interface.
+ * 	Note: pwm initialization interface supports one-time registration of multiple pwm channel!
+ * 	Auth: maozj.20200219.
+ * */
+kk_err_t kPwmModuleInit(PwmConfSt pwmlist[], unsigned char pwm_number, pPwmActionDoneCallback pCallback);
+
+/*	DESP: Indicator pwm trigger behavior control interface.
+	Auth: maozj.20200211.
+*/
+void kPwmOptTrigger(uint8_t id, uint32_t start_value, uint32_t end_value, uint32_t duration_time );
+
+/*	DESP: clear pwm gradient counter interface by pwm id.
+
+ * 	Auth: maozj.20200212.
+ * */
+bool kPwmClearGradientCounterById(uint8_t pwm_id);
+#endif
+

Code/KKAllToOneFloorHeatingMG21SDK665/00ikonke-app/driver/ikk-relay.h

+#ifndef __IKONKE_MODULE_ZERO_ACCESS_H_______________________________
+#define __IKONKE_MODULE_ZERO_ACCESS_H_______________________________
+
+
+#include "app/framework/include/af.h"
+#include "../general/ikk-module-def.h"
+
+#define RELAY_OBJS_SUPPORT_MAXN		8
+
+// the number of physical gpios that can be mapped for a single Zero-Access channel instance!
+#define RELAY_GPIO_MAPPING_MAXN		4
+
+#define RELAY_CHNN_UNKNOW_ID		0	// Valid[1,254], 255 for Operate all at the same time!
+#define RELAY_CHNN_ALLOPT_ID		255	// Valid[1,254], 255 for Operate all at the same time!
+
+
+typedef enum { EZAO_OFF = 0, EZAO_ON = 1 , EZAO_DEFAULT = 0xFF}RelayOptEnum;
+// Zero-Access channel status
+typedef enum { EZAP_LOW = 0/* low to on */, EZAP_HIGH/* high to on */ }RelayPolarityEnum;
+
+typedef struct {
+	GPIO_Port_TypeDef port;
+	unsigned int pin;
+}RelayGpioListSt;
+
+// ZA channel configuration struct
+typedef struct tag_relay_config_st {
+	unsigned char u8RelayChannelId; 	// 0 ~ 254
+
+	unsigned char u8GpioMappNum;   //relay numbers
+	RelayGpioListSt gpios[RELAY_OBJS_SUPPORT_MAXN]; //relay gpio buffer
+
+	RelayPolarityEnum eActionPolarity;
+}RelayChannelConfSt;
+
+typedef struct {
+	unsigned char u8RelayChannelId; 	// 0 ~ 254
+	RelayOptEnum opt;
+}RelayStatusSt;
+
+//user led control callback when relay on off
+typedef void (*pRelayOptLedCallback)(RelayStatusSt stRelayStatus);
+
+/*	DESP: Zero-Access channel operate interface.
+	Auth: dingmz_frc.20191115.
+*/
+void kRelayChannelOpt(uint8_t channel_id, RelayOptEnum opt );
+/*	DESP: Relay control module Initialize configuration interface.alse zero gpio is not necessary
+ * 	PARAM[port]: the GPIO port for Zero-Access detection.
+ * 	PARAM[pin]: the GPIO pin for Zero-Access detection.
+ *  PARAM[zero_on_time]: relay delay on time when get zero interrupt
+ *  PARAM[zero_off_time]: relay delay off time when get zero interrupt
+ *  PARAM[ePolarity]: the Zero GPIO pin interrupt edge
+ * 	PARAM[list]: the config list of all relay dection
+ * 	PARAM[channel_num]: total group number of relay.
+ * 	PARAM[callback]: callback function after relay operate done
+ * 	Auth: maozj.20191115.
+ * */
+kk_err_t kRelayModuleInit(GPIO_Port_TypeDef port, uint8_t pin, uint32_t zero_on_time, uint32_t zero_off_time \
+		, RelayPolarityEnum ePolarity,  RelayChannelConfSt *list, uint8_t channel_num,  pRelayOptLedCallback callback);
+
+#endif
+

Code/KKAllToOneFloorHeatingMG21SDK665/00ikonke-app/driver/ikk-timer.h

+#ifndef __IKONKE_MODULE_TIMER_H_______________________________
+#define __IKONKE_MODULE_TIMER_H_______________________________
+
+#include "app/framework/include/af.h"
+//#include "../general/ikk-module-def.h"
+#include "em_timer.h"
+#include "ikk-pwm.h"
+#if 0
+#if defined(RTCC_PRESENT) && (RTCC_COUNT == 1)
+#define RTCDRV_USE_RTCC
+#else
+#define RTCDRV_USE_RTC
+#endif
+#if defined(RTCDRV_USE_RTCC)
+#include "em_rtcc.h"
+#else
+#include "em_rtc.h"
+#endif
+#endif
+//#include "rtcdriver.h"
+
+typedef void (*pTimerPollCallback)(void);
+
+//可用于过零检测延时使用
+void kTimerInit(TIMER_ENUM timer, bool bIsOneShot,  uint32_t time_us);
+//do not use timer0
+void kTimerStart(TIMER_ENUM timer, bool bIsOneShot, uint32_t time_us,  pTimerPollCallback start_callback, pTimerPollCallback stop_callback);
+void kTimerStop(TIMER_ENUM timer);
+bool kTimerIsGoing(TIMER_ENUM timer);
+
+#endif

Code/KKAllToOneFloorHeatingMG21SDK665/00ikonke-app/general/ikk-debug.h

+#ifndef __IKONKE_MODULE_DEBUG_H______________________________
+#define __IKONKE_MODULE_DEBUG_H______________________________
+
+
+#define IKONKE_DEBUG_LOG_ENABLE		(0)	// ENABLE
+#define PROMPT_DSR ""
+
+#if (IKONKE_DEBUG_LOG_ENABLE)
+
+#define iKonkeAfSelfPrint(...) 	 do { \
+	emberAfPrint(0xffff, PROMPT_DSR); \
+	emberAfPrint(0xffff, __VA_ARGS__); \
+}while(0)
+
+#define iKonkeAfSelfDebugExec(x) if ( emberAfPrintEnabled(0xffff) ) { x; }
+#define iKonkeAfSelfPrintBuffer(buffer, len, withSpace) emberAfPrintBuffer(0xffff, (buffer), (len), (withSpace))
+#define iKonkeAfSelfPrintString(buffer) emberAfPrintString(0xffff, (buffer))
+#else
+#define iKonkeAfSelfPrint(...)
+#define iKonkeAfSelfDebugExec(x)
+#define iKonkeAfSelfPrintBuffer(buffer, len, withSpace)
+#define iKonkeAfSelfPrintString(buffer)
+#endif
+
+
+#endif

Code/KKAllToOneFloorHeatingMG21SDK665/00ikonke-app/general/ikk-sequence.h

+#ifndef __IKONKE_MODULE_SEQ_H_______________________
+#define __IKONKE_MODULE_SEQ_H_______________________
+
+#include "app/framework/include/af.h"
+#include "app/framework/util/af-main.h"
+
+
+
+#define UNKNOW_NODEID						0xFFFF
+#define UNKNOW_SEQUENCE						0xFF
+
+#define DELAY_CLEAR_SEQUENCE_TIME_MS		(10 * 1000)
+
+uint8_t kSequenceFindByNodeidAndEp(EmberNodeId nodeId, uint8_t endpoint, uint8_t *index);
+void kSequenceAdd(EmberNodeId nodeId, uint8_t endpoint, uint8_t sequence);
+#endif
+

Code/KKAllToOneFloorHeatingMG21SDK665/00ikonke-app/general/ikk-tick-handler.h

+/*
+ * ikk-tick-handler.h
+ *
+ *  Created on: 2019117
+ *      Author: dingmz
+ */
+
+#ifndef __IKONKE_MODULE_TICK_HANDLER_H____________________________
+#define __IKONKE_MODULE_TICK_HANDLER_H____________________________
+
+
+#include "stdint.h"
+#include "ctype.h"
+#include "app/framework/include/af.h"
+#include "ikk-module-def.h"
+
+
+#define TICK_LOOP_NMS		20	// MS
+
+#define MS2COUNT(nms)		((nms) / TICK_LOOP_NMS)
+
+/* DESP: tick handler continue running trigger interface.
+ * Auth: dingmz_frc.20191107.
+ * */
+void kTickRunnningTrigger(void );
+
+
+#endif

Code/KKAllToOneFloorHeatingMG21SDK665/kkAllInOneFloorHeatingMG21SDK665V1-prebuild.py

+# This file was generated by Simplicity Studio from the following template:
+#   app/esf_common/template/common/common-prebuild.py
+# Please do not edit it directly.
+
+# Pre Build processing.